polymount-twinlock.jpg

THE SELF-ADHESIVE
TWINLOCK SLEEVE

The Twinlock sleeve is compressible and self-adhesive meaning that tape is no longer necessary to mount your printing plates. The sleeve’s adhesive qualities are easily reactivated simply by cleaning its tacky surface thus making it ready to hold the next set of plates.

Efficieny increase in the mounting department

Mounting a printing plate on a Polymount sleeve is both easier and quicker than mounting a plate by using tape. Clean the sleeve, check the plate for rough edges, clean the back of the plate, use primer on the edge of the plate, mount the plate with the mounting roller and you are ready for your next run.

The Polymount sleeve reduces your tape waste and thus improves your Carbon Footprint

By using the Polymount sleeve you no longer need tape/sticky back to mount your plates. Clean the sleeve with our Twinlock cleaner and you will reactive the tackiness of the sleeve and it’s ready for the next run.

Consistent print results

Due to our excellent quality management all the sleeves are measured on 0.001 mm exact to ensure that you’re set of sleeves have the same repeat and will give you the best print results that you desire. Our Twinlock sleeves are far more accurate compared to the sleeves plus tape.

ROI after 25 times of usage

The Polymount sleeve is reusable, tape/sticky back is not! You will save significant amounts of money on tape so therefore your Twinlock investment will be profitable after 25 times of usage compared to tape/sticky back.

Permanent adhesion & compressibility

Due to the structure of the Polymount sleeve, the adhesion will be reactivated every time you clean the Twinlock sleeve. Our open cell foam ensures that Twinlock will have the excellent compressibility for as long as the lifetime of the sleeve if handled with care.

The Polymount sleeve eliminates the need for tape

By using the Polymount sleeve you no longer need tape/sticky back to mount your plates. Clean the sleeve with our Twinlock cleaner and you will reactive the tackiness of the sleeve and it’s ready for the next run.

TWINLOCK IS BETTER, FASTER AND CHEAPER.

The concept of Twinlock

Manual mounting procedure

Semi Automatic mounting procedure

Downloads

Twinlock sleeves are extremely accurate

Mounting sleeves with different tapes causes a totally unnecessary inconsistency, Twinlock sleeves do away with this variable that can so easily cause errors in your daily production. Constant monitoring of the Polyurethane and Twinlock (adhesive) coating throughout production yields the tightest possible tolerances. Our cutting edge production process, traceability capabilities and the use of laser measuring systems allow us to produce these highly accurate outside diameters time after time.

Not only will our self-adhesive sleeve bring you added efficiency, Twinlock will also provide you with consistency. Consistency of performance and quality in adhesion levels, outside diameters and compressibility!
 

The self-adhesive Sleeves are available in three densities: Soft, medium and hard

These different densities of Polyurethane foam will offer you the (award winning) quality print results you are looking for.


In 2006, 2009, 2010, 2012, 2015 and 2017 “Best of Show print awards” were printed using the self-adhesive Twinlock sleeves.

Twinlock Support Products

All support products
Twinlock Activator

Twinlock Activator

€Quote

Pump Bucket

Pump Bucket

€Quote

Polymount Supportive Block

Polymount Supportive Block

€Quote

Do you have a question for us?

Contact us